|201, 8th building, Link International Business Park, Shuilian Road, Nancheng, Dongguan City,Guangdong, Chinaemail@example.com|
|Place of Origin:||GuangDong, China|
|Brand Name:||Artisan Design|
|Minimum Order Quantity:||20pcs/SKU|
|Packaging Details:||Standard Export Carton , 200psi or 220ips or 275psi|
|Payment Terms:||T/T, L/C|
|Supply Ability:||80 Containers Per Month|
|Item No:||HY-MC012||Material:||Wood And Cashmere|
|Wood Finish:||Natural Walunt||General Use:||Living Room|
|Package:||1PC / CTN||Name:||Aspen|
Aspen Living Room Solid Wood Lounge Chair; Upholstered PU/ Leather / Cashmere/ Wool Chair with Woodn Frame. Looking at the chair from front, side, or back you can see the craftsmanship in the wood frame and the tight tailoring of seams.
This is our new product, a wooden frame lounge chair
It is made of ash wood solids. Light and elegant but strong. The upholstery can be choosen from PU, cashmere and wool.
Frame is in ash solids designed for an open airy apprearance
The high back is design with curve that flows with the contour of your back giving a comfortable relax fit.
The seat is loose fitting for that extra comfort. .
The pitch on the chair is slightly angle back to give you full support when sitting back.
This chair will be long lasting part of your room decor with strong wood dowel constructin.
Wonderful selection to your bedroom decor or place in sitting area for cup of tea.
Package and Delivery
|Package||Foam and Carton board for inner protection+Export carton strength per customer required|
1.Various fabric color available
2. Authoritative official Lab Test Reports
|CUSTOMER NAME:||ADVANTECH POLYURETHANE FOAM PRODUCTS CO.LTD.|
|ADDRESS:||BLOCK E, F NANPING INDUSTRIAL ESTATE,QIAOLONG VILLAGE,|
|TANGXIA TOWN, DONGGUAN, GUANGDONG, CHINA|
|The following sample(s) was/ were submitted and identified on behalf of the client as:|
|SGS Ref. No.||:||SDHL1603002616FB|
|Date of Receipt||:||Mar 24, 2016|
|Testing Start Date||:||Mar 24, 2016|
|Testing End Date||:||Mar 24, 2016|
|Test result(s)||:||For further details, please refer to the following page(s)|
|Schedule 1 PartⅠ of Furniture and Furnishings (Fire) (Safety)|
|1||Regulations 1988 With Amendments In 1989, 1993 and 2010 of||PASS||/|
|2||California Technical Bulletin 117-2013 Section 3||PASS||/|
The Test, Specified in Schedule 1 Part Ⅰof the Furniture and Furnishings (Fire) (Safety) Regulations, is based on BS 5852: Part 2: 1982.
To assess the ignitability of polyurethane foam in slab used in upholstered components when subjected to ignition source 5.
|Materials / Color||Foam / Blue||Density||Approximately|
|Specified Thickness of Specimen||(75±2) mm||Actual Thickness of||75 mm|
|Precondition||Indoor Ambient Condition||72 h|
|Conditioning of Test Specimen||Temperature:(23±2)℃;Relative Humidity: (50±5)|
|and Ignition Source(s)||Duration:24 h;|
|Testing Enclosure (fume||21 ℃||RH 55|
|cupboard / room)|
The following test results relate only to the ignitability of the combination of materials under the particular condition of test. They are not intended as a means of assessing the full potential fire hazard of the materials or products in use.
|(A) Progressive smouldering (Clause 4.1 of BS 5852: Part 2: 1982)|
|4.1 b) Any composite that product externally detectable amounts of smoke,||NO||NO|
|heat or glow 60 min after ignition of the crib.|
|4.1 c) Any composite that displays escalating combustion behaviour so that it||NO||NO|
|is unsafe to continue the test and requires forcible extinction.|
|4.1 d) Any composite that smoulders until it is essentially consumed within the||NO||NO|
|test duration relevant to the source|
|4.1 e) Any composite that smoulders to the extremities of the specimen viz|
|upper or lower margins, either side or to its full thickness, within the duration of||NO||NO|
|4.1 f) Any composite that, on the final examination, shows evidence of charring|
|other than discolouration, more than 100 mm in any direction apart from||NO||NO|
|upwards from the nearest part of the original position of the source.|